If inventory parts are being received, enter, or click to select, the receiving warehouse. If Inventory is not being used, this field is disabled. You can establish warehouses on the Manage Warehouses screen in Inventory.

If you entered a warehouse, and PO is RMA type, Cosptoint loads the RMA PO default locations into the Default Receiving and Rejection Location fields in the header.

Enter a purchase order receipt ID. This field is required and is used throughout Costpoint to identify the receipt. For non-Inventory users, if the Auto-Assign Receipt IDs check box is selected on the Configure Receiving Settings screen, a value for this field is assigned when the record is saved. If you use Inventory, auto-assign is determined in the Transaction IDs subtask of the Manage Warehouses screen. The ID in this field cannot begin with a space.

Enter, or click to select, the date of the receipt. Costpoint date defaults, but can be modified if necessary.

Select the receipt traveler type from the drop-down list to determine how receipts are grouped on the receipt traveler. The setting in the Default Traveler Type field on the Configure Receiving Settings screen defaults into this field. Costpoint-defined types are as follows:

• By Line: Select this option to group receipts by purchase order line number.
• By Receipt: Select this option to group receipts by purchase order receipt ID.

Enter, or click to select, a valid employee ID. This field is required and the employee must exist on the Manage Employee Information screen in Costpoint Employee as an active employee.

Enter, or click to select, a valid purchase order number. Subcontract POs are excluded. This purchase order ID must already exist on the Manage Purchase Orders screen. This is a required field.

If you entered an RMA type PO ID, Costpoint loads the associated RMA ID in the RMA field. Alternatively, if a RMA ID is entered, it will load the associated RMA PO ID.

If the entered purchase order is a blanket release, enter, or click to select, the release number that is to be received. If this purchase order is not a release, this field defaults to zero and is not maintainable. You can maintain blanket releases on the Create Blanket Purchase Order Releases screen.

This field defaults from the purchase order and cannot be modified.

This field defaults from the purchase order and cannot be modified.

This field defaults from the purchase order and cannot be modified.

This field displays the buyer name linked to the buyer ID.

Enter a packing slip ID. This field is required if you selected the Require Packing Slip check box on the Configure Receiving Settings screen.

Enter, or click to select, a default receiving location within the receiving warehouse.

Enter the offsite receiver identifier. This field is for reference only.

Enter a default rejection location.

Costpoint multiplies the Received Quantity (Received Qty (PO U/M) by the Net Unit Cost on the purchase order for each line to determine the total received amount for this purchase order receipt. This is a calculated field and cannot be modified. This field is not displayed if Cost Suppression is in effect on the Manage Users screen in Administration.

Select this check box to save the receipt transactions without entering receipt line information when splitting a PO line for multiple receipt locations. You can sort the columns however you want to after saving the transaction.  

Click this button to load PO lines in the receipt lines table.

This field displays the purchase order line number and cannot be modified.

This field displays the receipt line number and cannot be modified.

This field displays the item ID from the purchase order. If you selected the Allow Item Change in Receiving check box on the Configure Receiving Settings screen, you can modify these fields. If that same check box is left unchecked, these fields are display-only and cannot be modified.

To modify, enter or click to select, an Item or Rev value.

If selected, this check box indicates that there are multiple delivery schedules that exist for the PO line. This check box is cleared and disabled for new lines.

This field displays the item revision from the purchase order. If you selected the Allow Item Change in Receiving check box on the Configure Receiving Settings screen, you can modify these fields. If that same check box is left unchecked, these fields are display-only and cannot be modified.

To modify, enter or click to select, an Item or Rev value.

This field defaults from the purchase order and cannot be modified. If you have modified the Item or Rev fields, this field defaults from the purchase order of the new item.

This field is visible only if the Use Part Data Security Controls check box is selected on the Configure Product Definition Settings screen, which indicates that the item is subject to data security restrictions, as defined in the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR).

This field defaults from the purchase order. This field is modifiable if you have modified the Item or Rev fields. If you have modified either of these fields, this field defaults from the purchase order of the new item.

Enter the quantity being received, for this purchase order line item, in the ordering unit of measure. Costpoint calculates this quantity if a quantity is entered in the Received Qty (Inventory U/M).

Enter the quantity being accepted for this purchase order line item in the ordering unit of measure. The total accepted quantity plus the total rejected quantity cannot exceed the total received quantity.

• If you selected the Hard-Edit on QC Required PO Lines check box on the Configure Receiving Settings screen and the QC Insp Reqd flag on the Purchase Order line is Y, you cannot enter an accepted quantity in this field.
• If the Receiving Settings Hard-Edit on QC Required PO Lines check box is clear, and the QC Insp Reqd check box on the Purchase Order is Y, Costpoint warns you that QC is required, but still allows entry of an accepted quantity in this field.
• In all other cases, you can enter the accepted quantity. Costpoint calculates this quantity if a quantity is entered in the Accepted Qty (Inv U/M) field.

The purchase order's original order quantity is displayed in this field. This column displays if you selected the Display Open/Order Quantities check box on the Configure Receiving Settings screen.

This field displays the total quantity received against this purchase order line. This is the sum of the Received Qty for all other receipts against this purchase order line.

Costpoint automatically calculates the open quantity for this purchase order line item, in the ordering unit of measure. This non-modifiable column displays if you selected the Display Open/Order Quantities check box on the Configure Receiving Settings screen. The calculation is as follows: quantity ordered minus quantity received for all receipts plus quantity rejected for all receipts, in the ordering unit of measure.

This field displays the inventory abbreviation associated with that purchase order line, if the purchase order line is for an inventory item. If this field is null when you receive the PO line, and the Require Location for Non-Inventory Receipts check box is clear on the Configure Receiving Settings screen, the default Receiving Location, Acceptance Location, and Rejection Location columns do not default. Inventory abbreviation information is established on the Manage Inventory Projects screen.

This field displays the warehouse in which the items for this purchase order line are received. You can establish warehouses on the Manage Warehouses screen in Inventory.

Costpoint calculates this field by converting the PO quantities from their ordering unit of measure to the inventory unit of measure that has been established. If no conversion is set up, then the quantity is derived from the Received Qty (PO U/M) field. Enter the quantity to have the PO U/M fields calculated. Both the Open Qty (PO U/M) and Open Qty (Inventory U/M) fields display if you selected the Display Open/Order Quantities check box on the Configure Receiving Settings screen.

Costpoint calculates this field by converting the PO quantities from their ordering unit of measure to the inventory unit of measure that has been established. If no conversion is set up, then the quantity is derived from the Accepted Qty (PO U/M) field. Enter the quantity to have the PO U/M fields calculated. Both the Open Qty (PO U/M) and Open Qty (Inventory U/M) fields display if you selected the Display Open/Order Quantities check box on the Configure Receiving Settings screen.

Costpoint calculates this field by converting the PO quantities from their ordering unit of measure to the inventory unit of measure that has been established. If no conversion is set up, then the quantity is derived from the Rejected Qty (PO U/M) field. Enter the quantity to have the PO U/M fields calculated. Both the Open Qty (PO U/M) and Open Qty (Inventory U/M) fields display if you selected the Display Open/Order Quantities check box on the Configure Receiving Settings screen.

Costpoint calculates this field by converting the PO quantities from their ordering unit of measure to the inventory unit of measure that has been established. If no conversion is set up, then the quantity is derived from the Rejected Qty (PO U/M) field. Enter the quantity to have the PO U/M fields calculated. Both the Open Qty (PO U/M) and Open Qty (Inventory U/M) fields display if you selected the Display Open/Order Quantities check box on the Configure Receiving Settings screen.

This field displays the received amount, which is automatically calculated by Costpoint. The calculation is as follows: Received Qty times the Net Unit Cost on the purchase order. This field does not display if you have Cost Suppression in effect on the Manage Users screen in Administration. If the purchase order line has an order amount but no order quantity, enter this amount.

This field displays the accepted amount, which is automatically calculated by Costpoint. The calculation is as follows: Accepted Qty times the Net Unit Cost on the purchase order. This field does not display if you have Cost Suppression in effect on the Manage Users screen in Administration. If the purchase order line has an order amount but no order quantity, enter this amount.

This field displays the open amount — an amount automatically calculated by Costpoint. The calculation is as follows: Open Qty multiplied by the Net Unit Cost on the purchase order. This field does not display if you have Cost Suppression in effect on the Manage Users screen in Security, or if you did not select the Display Open/Order Quantities check box on the Configure Receiving Settings screen. If the purchase order line has an order amount but no order quantity, enter the order amount.

This field defaults from the Default Receiving Location field but can be modified.

Enter, or click to select, the location where the accepted quantity has been placed (required for inventory parts if there is an acceptance quantity). This location defaults from the default warehouse QC acceptance location or the preferred location for that part/project or part, depending on the selection in the Acceptance Location Default group box on the Configure Receiving Settings screen. If you use , all in-shipping and on-hand locations display, as well as the current inventory for the received part and the inventory abbreviation from the inventory warehouse location.

Enter the quantity being rejected, for this purchase order line item, in the ordering unit of measure. The total rejected quantity plus the total accepted quantity cannot exceed the total received quantity. Costpoint calculates this quantity if you enter a value in the Rejected Qty (Inventory U/M) field.

This field defaults from the Default Rejection Location field but can be modified.

This field displays the rejected amount — an amount automatically calculated by Costpoint. The calculation is as follows: Rejected Qty multiplied by the Net Unit Cost on the purchase order. This field does not display if you have Cost Suppression in effect on the Manage Users screen in Administration. If the purchase order line has an order amount but no order quantity, enter the order amount in this field.

Enter, or click to select, a valid rejection reason code. The code must already exist in the Vendor Rejection Reasons table. This field is required if you selected the Require Reason Codes for Rejections check box on the Configure Receiving Settings screen and a rejected quantity exists.

Enter, or click to select, a valid disposition status code for this rejection line. This is a required field if you entered a Rejected Qty or amount. Valid options are:

• On-Hold: Rejected items are placed on hold. Inventory parts remain in inventory but must be moved to an on-hold location.
• RTV: Return to vendor. Rejected items are sent back to the vendor for repair/replacement. Credit inventory parts are removed from inventory.
• Scrap: Rejected items are destroyed. Inventory parts are removed from inventory.
• Use-as-is: Rejected items are used, despite their rejection. Inventory parts remain in inventory.
• Rework: Rejected items are repaired/modified on-site to correct the problem. Inventory parts remain in inventory.

Select the Rej Order/Pmt Disposition status code from the drop-down list for this rejection line. This is a required field if you entered a Rejected Qty or amount. Valid options are:

• Credit Due: The vendor credits the amount owed by the rejected amount. This amount is not considered an open quantity or amount for commitment purposes. The order quantity of the purchase order line is reduced by this rejected quantity or amount.
• Pay: The company pays for the items anyway. It is considered accepted for invoice matching and commitment purposes, but is still considered a rejection for vendor performance reasons.
• Repair/Replace: The vendor repairs or replaces the item. The purchase order line is considered open, pending eventual receipt of the replacement item.

Enter the vendor's Returned Material Authorization (RMA) number, if material is to be returned to vendor. This is an optional field.

This field displays the value from the purchase order. The QC Insp Reqd field indicates whether or not this purchase order line requires a separate quality control inspection. If this field is Y (Yes), you must use the Manage Quality Control Inspections screen.

This display column displays whether or not a source inspection was required on this item.

Y (Yes) or N (No) in this column indicates whether or not certificate of conformance was required on this item.

This field displays the value from the Manage Purchase Orders screen and cannot be modified.

This field displays the revision number of the manufacturer part.

This field displays the value from the Manage Purchase Orders screen and cannot be modified.

This field displays the revision number of the vendor part.

This field displays the value from the Manage Purchase Orders screen and cannot be modified.

This field displays the miscellaneous type code, if the purchase order line is for a miscellaneous item, and cannot be modified.

This column displays the order reference type entered for the purchase order line, which designates whether the line item is related to a S (Sales Order), M (Manufacturing Order), or N (Neither/None) in Costpoint. You should populate this field when entering a PO only when you are adding an order reference number to the purchase order line.

This column displays the order reference number, which is a manufacturing order or internal sales order number assigned to the purchase order line.

This field displays whether or not this purchase order is for a drop shipment.

This field displays Y (Yes) if a receipt traveler has been printed. N (No) indicates the receipt traveler has not yet been printed.

This field displays the requisition number from the Manage Purchase Orders screen.

This field displays from the purchase order. This field indicates whether or not overshipments are allowed for this purchase order line.

This field displays from the purchase order. This percentage determines the excess quantity that can be accepted if overshipments are allowed.

This field displays the value from the Manage Purchase Orders screen and cannot be modified.

This field displays the value from the Manage Purchase Orders screen and cannot be modified.

This field displays the planner for this purchase order line as established on the Manage Purchase Orders screen.

This field displays the notes for this purchase order line as established on the Manage Purchase Orders screen.

This field displays the inventory unit of measure if this is an inventory item.

Click this button to automatically receive all lines equal to the open quantity.

Click this button to automatically accept everything that was received, less any rejected quantity, for those lines that do not have a QC Insp Reqd of Y.