Select this option to indicate that purchase order items are immediately eligible for additional system processing, including receiving, quality inspection, and invoicing.

Select this option to indicate that purchase order items cannot be received or invoiced until the order passes through an approval process. You can perform the purchase order approval process in either the Approve Pending Purchase Orders screen or the Manage Purchase Orders screen, depending on whether or not you have selected the Allow Change to Open in Enter POs checkbox.

Select this checkbox to indicate that the purchase order status can be changed from Pending to Open on the Manage Purchase Orders screen. If you clear this checkbox, pending orders can be changed to Open only on the Approve Pending Purchase Orders screen.

Select this checkbox to force the initial purchase order status to Pending if the total PO value is over the buyer's authorized limit. A buyer's authorized spending limit is optionally established on the Manage Buyers screen and can be associated with purchase order line amounts and/or purchase order total amounts. If this checkbox is clear, purchase orders having amounts over the buyer's authorized limits cannot be saved.

Select this checkbox to allow pending lines in purchase orders with a Status of Open, Closed, or System Closed.

If you select this option, Costpoint assigns the next sequential purchase order number.

If you select this option, you must enter the purchase order number before the purchase order can be saved.

If you select this option, Costpoint assigns the purchase order number from the range of numbers assigned to the buyer. Each buyer can be assigned an individual range of numbers.

If you select the System or Buyer option, enter the last purchase order number issued, up to 10 alphanumeric characters, before using the Costpoint system to generate new purchase order ID numbers. Costpoint increments the number of the last purchase order entered by one. If you are not currently using a purchasing system, the starting purchase order number can be zero. Purchase order numbers entered manually in the Manage Purchase Orders screen do not update this field.

To have purchase order numbers assigned sequentially, you must select a ceiling number not to exceed 10 digits. For example, if the highest number desired is 9999999999, enter zero as 0000000000; or if the highest number desired is PO-9999, and the last purchase order number used was PO-124, that number should be entered as PO-0124.

The Last System PO Number is always incremented from the right and only if the rightmost character is numeric (not alphabetic). For example: PO594123 becomes PO594124; POIDABCD9 becomes POIDABCD0; 9999999999 becomes 0000000000; PO9999999A is not incremented. Enough numeric characters should be assigned to the right to ensure that duplicates do not occur.

Buyers are entered and optionally linked to, or associated with, account/organizations, projects, and vendors on the Manage Buyers screen. Subsequently, there are two methods of establishing how buyer validations to selected account/organizations and projects should function in purchase order entry.

Select the two system-defined buyer validations from the drop-down list. The values are:

• Implicit: This option indicates that buyers do not have to be specifically linked to the account/organization or the project that has been entered on the purchase order line item. However, if any one buyer is linked to that account/organization or project, it becomes required that all buyers that wish to enter the same account/organization or project must be linked. Establish the links between buyers and valid account/organizations and projects on the Manage Buyers screen.
• Explicit: This option indicates that buyers must be specifically linked to the account/organization and project entered on a purchase order line item. Establish the link between the buyer and the account/organizations and projects on the Manage Buyers screen.

Select this checkbox to enable the Unreleased Blanket Line Amts checkbox on the Compute/Print Purchasing Commitments screen. This checkbox includes blanket balance amounts in the calculation of purchase commitments. The blanket balance amount is the total blanket amount less the cumulative extended cost of all purchase order releases against the blanket order.

If this checkbox is clear, the Unreleased Blanket Line Amts checkbox on the Compute/Print Purchasing Commitments screen is disabled. Purchase orders and blanket order releases are included in the commitment calculations.

Select this checkbox to automatically set the Commitment Type to Amount when you add a new line charge to a purchase order line that uses a 3-way matching option.

Select this option to indicate that a requisition number is not required for the purchase order line item. However, a requisition number can be entered for any or all of the line items. This is the default.

Select this option to indicate that the Requisition field in the purchase order line cannot be left blank. Any combination of characters is accepted as a requisition number.

Select this option to indicate that you must enter a requisition number for each purchase order line item and the requisition number must pass validation by Costpoint. Costpoint verifies that the requisition number exists on the Manage Purchase Requisitions screen. Choose this selection only when all purchase orders entered in Costpoint are associated with existing requisitions in Costpoint or when purchase orders are system-generated from requisitions.

Select this checkbox to provide a default value in the Confirming PO checkbox on the Manage Purchase Orders screen, if the majority of your purchase orders are placed verbally. You can override this default on the Manage Purchase Orders screen. When the purchase order is printed, the word "Confirmation" prints in the header of the purchase order and can be highlighted.

Leave this checkbox clear if most purchase orders are not confirming orders.

If you have an address to which procured items are delivered, enter, or click to select, a valid Ship ID. The ID you select becomes the default during purchase order entry on the Manage Purchase Orders screen. Override this default on the said screen and at each PO line item, as necessary. Valid ship IDs can be added to Costpoint and maintained in the Vendor table as well as on the Manage Branch Locations screen.

Leave this checkbox clear to suppress a default ship ID on the Manage Purchase Orders screen. The ship ID is required when the PO is entered unless it is an amount-only, two-way match PO.

Select this checkbox if you want Costpoint to calculate applicable sales or Value Added Tax for purchase order line items designated as taxable in the Manage Purchase Orders screen. Sales or VAT tax is individually calculated for each purchase order line item based on the item's shipping location and the corresponding tax rate. Leave this checkbox clear to prevent Costpoint from calculating sales or VAT tax for any line items. Only when all items purchased are non-taxable should this checkbox be left clear and tax calculations suppressed. If you clear this checkbox, tax is not calculated during purchase order entry regardless of the taxable status designated at the line level.

You can establish purchase order line items as parts, goods, or services, with certain default values and characteristics in Costpoint Product Definition. One of the default values that can be associated with an item is taxable status.

Select this option to indicate that the taxable status for each line item should be determined by default values assigned to the item on the Configure Product Definition Settings screen. This value defaults on the Manage Purchase Orders screen and can be modified .

Select this option to have all purchase order line items marked as taxable. Initially, this default displays on the Manage Purchase Orders screen and is subsequently provided as a default for line items on the order. You can override the taxable status on the said screen as well as for each line item.

Select this option to indicate that all purchase order line items have a non-taxable status default. You can modify the default on the Manage Purchase Orders screen and on each applicable line item.

Select this checkbox if you want to save old change orders to a history file when creating a change order. If this checkbox is clear, old change orders are not saved when new change orders are created.

If you select this checkbox, you can modify the Save Existing Change Order to History File checkbox on the Create Purchase Order Change Orders screen. If this checkbox is clear, you cannot modify the Save Existing Change Order to History File while on the Create Purchase Order Change Orders screen.

Select this checkbox to provide a default for the Restrict Release Items to Items on Blanket drop-down list on Manage Purchase Orders screen. Purchase order line items are classified as parts, goods, services, or miscellaneous items. Select this checkbox to indicate that line items entered on blanket order releases should be restricted to the same items entered on the original blanket order. Override this default value as necessary on the Manage Purchase Orders screen.

Leave this checkbox clear to indicate that items on the release can be different from items on the original blanket order. Modify this default during purchase order entry.

Select this checkbox to provide a default for the Restrict Release Line Totals to Blanket Line Totals drop-down list on Manage Purchase Orders screen. Select this checkbox to indicate that the release line total amount cannot exceed the total amount of the corresponding line item on the original blanket order. The line total amount includes any applicable discounts and sales tax.

If this checkbox is clear, the release line total amount can exceed the total of the blanket line amount. Modify this checkbox as necessary; this serves as a default on the Manage Purchase Orders screen.

Select this checkbox to provide a default for the Do Not Exceed Blanket Gross Unit Cost on Rel Line drop-down list on Manage Purchase Orders screen. Select this checkbox to indicate that the gross unit cost of an item entered on the release cannot exceed the gross unit cost of the same line item on the blanket order.

If this checkbox is clear, the gross unit cost on the release can exceed the gross unit cost entered on the blanket order for the same line item. Modify this checkbox, which serves as a default on the Manage Purchase Orders screen, as necessary.

Select this checkbox to provide a default for the Do Not Allow Rel Amts to Exceed Total Blanket Amt drop-down list on Manage Purchase Orders screen. Select this checkbox to indicate that the cumulative amount of all release orders associated with the original blanket order cannot exceed the total amount of the original blanket order.

If this checkbox remains empty, the cumulative amount of all release orders can exceed the total amount of the original blanket order. Modify this checkbox, which serves as a default on the Manage Purchase Orders screen, for individual blanket orders as necessary.