Click or to select a proposal ID. The proposal revision and proposal description display from the Manage Proposals screen.

This field displays the status of the proposal record on the Manage Proposals screen. Valid values are:

• In Process
• Completed
• Submitted
• Closed Awarded
• Closed Lost
• Closed Not Submitted

Select this check box to display all Make parts for the PBOM in the table window, in addition to all Buy parts. If you leave this check box clear, the table window displays Buy parts only.

This field displays the Customer ID assigned to the proposal on the Manage Proposals screen. The customer's name displays in the unlabeled field to the right.

This field determines the quantity breakpoint level of cost information that displays in the table window. The default breakpoint level is 1. To view cost information for a different end-item quantity breakpoint level, select another level from the drop-down list. (You can do this before or after selecting a Proposal.)

If you were already viewing cost information for a proposal when you modified the breakpoint level, click in the toolbar to load the cost information for the new level. If you used subtasks to modify cost data for the currently displayed breakpoint level, Costpoint saves the modifications before loading the component costs for the newly selected breakpoint level.

For each PBOM line that has a proposal item row for that proposal, component part, and make/buy code, Costpoint determines the unit cost of that line by summing the cost elements for the selected breakpoint. If no matching proposal item row exists, the row's proposal cost and cost source fields are null.

These fields display the item ID, revision number, and description from the PBOM line.

This field displays M (Make) or B (Buy) from the PBOM line to indicate whether you make this part or buy it. This setting loads from the Manage Parts screen (for standard parts), or the Manage Provisional Parts screen (for provisional parts).

This field displays one of the following codes to indicate the type of item:

• Part
• Provisional
• Good
• Service

This field displays the provisional part type from the PBOM line if the component part is a provisional part. This field is blank for standard parts. Establish provisional part types on the Manage Provisional Part Types screen, and assign them on the Manage Provisional Parts screen.

This field displays the inventory unit of measure for the part from the PBOM line. Assign the unit of measure on the Manage Parts screen (for standard parts), or on the Manage Provisional Parts screen (for provisional parts).

If proposal costs exist for this proposal item row, this field displays Y (Yes), and the appropriate proposal cost fields are populated.

This field displays the sum of the Proposal Direct Unit Cost and Proposal Burden Unit Cost.

The system calculates this field by summing the following unit cost amounts associated with the required breakpoint quantity:

material cost + labor cost + subcontract cost + miscellaneous 1 cost + miscellaneous 2 cost

The system calculates this field by summing the following cost amounts and burden rates (as specified on the Costing Parameters tab of the Manage Proposals screen) for the proposal row's selected breakpoint:

(material cost * material burden rate) + (labor cost * labor burden rate) + (subcontract cost * subcontractor burden rate) + (miscellaneous 1 cost * miscellaneous 1 burden rate) + (miscellaneous 2 cost * miscellaneous 2 burden rate)

This amount represents the total unit cost multiplied by the total quantity of this part that is required for the selected proposal breakpoint. Any fixed costs associated with this part are added to this amount. The system calculates this field by summing the following for the proposal row's selected breakpoint:

(Proposal Total Unit Cost * quantity of this part required for the selected end item's breakpoint quantity) + Fixed Cost

This field displays the type of the cost source (for example, a purchase order or vendor quote) that was used to determine the unit costs for this part at this quantity breakpoint. Establish cost source types and descriptions on the Manage Materials Estimating Cost Source Types screen.

This field displays the description of the Cost Source Type.

This field displays the ID of the cost source (usually an order or quote number) that was used to determine the unit costs for this part at this quantity breakpoint. View additional cost source details in the Proposal Item Costs subtask.

These fields display the quantity breakpoint for each item by multiplying the part's end item quantity by the breakpoint quantity on this screen's header for each proposal quantity break field.

This field displays the available inventory of the part. This field defaults from the Available Inventory Qty field in the Inventory subtask.

This field displays the total cost of the item. It is calculated as follows:

Proposal Total Unit Cost * (the proposal quantity based on the selected breakpoint number - Available Inventory Qty) + Fixed Cost

If the result is less than zero, this field displays zero.

This value determines the cost if you meet the minimum or multiple lot size rules when buying or making the part.

The Min/Mult Lot Extended Cost is calculated if:

• The part's order policy type is M, because you selected Min/Mult Lot Size in the Policy Type field and made entries in the Minimum/Multiple fields in the Order Policy group box in the Planning subtask of the Manage Parts screen (for standard parts), or the Manage Provisional Parts screen (for provisional parts), and
• The component part's Make/Buy status is M and is an assembly in a PBOM for this proposal, and
• The component itself has a Make/Buy status of B and the component Type field is B (Buy with Components).

The following table outlines the conditions for calculating the Min/Mult Lot Extended Cost. If the 1st condition above is true, then:

This field defaults from the Fixed Cost field in the Proposal Item Costs subtask. It represents the costs associated with a part, regardless of the number of units ordered or built.

This field displays the rolled-up fixed costs for each level. The total fixed cost amount for the top level is cumulative.

This field displays the commodity code for the selected part from the Manage Parts screen (for standard parts), or the Manage Provisional Parts screen (for provisional parts). Establish commodity codes on the Manage Commodity Codes screen.

This field displays the industry classification code for the selected part from the Manage Parts screen (for standard parts), or the Manage Provisional Parts screen (for provisional parts). Establish industry classification codes on the Manage Industry Classifications screen.

This field displays Y (Yes) if the Always Quote check box is selected in the Planning subtask on the Manage Parts screen. This indicates that vendor quotes are required when you use this part for estimating. This field displays N (No) if the Always Quote check box is clear.

This field displays the quantity being proposed for the proposal quantity breakpoint selected in the header part.

These fields display the minimum lot size and multiple lot size based on the Policy Type in the Planning subtask on the Manage Parts screen (for standard parts), or the Manage Provisional Parts screen (for provisional parts).

This field displays Y (Yes) if the Common Stock check box is selected in the Planning subtask on the Manage Parts screen, which indicates that this part is not tied to a particular project, but is ordered as part of a common pool of items. This field displays N (No) if the Common Stock check box is clear.

This field displays the component type code that was assigned to this component part on the Manage Proposal Bills of Material screen. Valid options are:

• Buy w/Comp
• Standard
• Phantom
• Reference
• Tool
• Deleted

The component type code is assigned to the part in the Part Type drop-down list on the Manage Parts screen (for regular parts), or the Manage Provisional Parts screen (for provisional parts).

This field displays the release status of the component part from the Manage Proposal Bills of Material screen. If the component is a provisional part, this field displays Provisional. If the component is a standard part, this field defaults from the Manage Parts screen with one of the following:

• Estimating — The part is used only for estimating purposes.
• Obsolete — The part is obsolete.
• Pre-Release — The part is not officially released for use in production.
• Released — The part can be used in all functions throughout the production process.
• Phase-Out — The part is being phased out, but you can use the remaining quantity.

This field displays the date and time when the proposal was last calculated. This field updates each time a line is calculated on the Compute Proposal Item Costs screen.

This field displays the Procurement Type code from the Request for Quote Defaults tab of the Manage Proposals screen. Procurement type codes default for the RFQ that is generated from this proposal. You can establish procurement type codes on the Manage Procurement Types screen.

This field displays notes about this item line from the Notes tab of the Manage Proposals screen.